Konnra Electronics CO., LTD.

  PS5, Xbox series S consoles and other next-generation devices have been released one after another. The HDMI and DP interfaces currently used on displays will become mainstream in the future? Let me give you a brief introduction to the current interface status. At present, the interface of the display will be equipped with HDMI and DP interfaces, while the VGA interface and DVI interface can only be seen on some low-end displays, and it is basically certain to exit the stage of history. At present, the HDMI interface in the mainstream interface of the display is a left-right symmetrical trapezoid. TVs, computers, and projectors all support it, and it is currently a more common connection port. Compared with the HDMI interface, the DP interface is much more "specific". It was developed for the computer field from the beginning, so there is almost no DP interface for electronic devices other than monitors and graphics cards. In addition to the different interface use ranges,

  The protection design of the USB3.0 connector interface has very important significance, so the interface protection design of USB3.0 cannot be sloppy, so what are the interface protection requirements of the   USB3.0 connector ? Let’s read this together. Article, after reading it, you will know the interface protection design requirements of the USB3.0 connector. The high-speed data transmission performance of the USB connector has gradually become a necessary function, and the Universal Serial Bus (USB) interface is an example of the protocol, which is mainly to enhance its data transmission function, while increasing the speed and power, and the new version of USB3 The .0 connector also increases the performance of simultaneous two-way data transmission. The following Konnra connector engineers will come to you to learn about the interface protection design requirements of the USB3.0 connector. The interface protection requirements of the USB3.0 connector cover the threat of fault