Konnra Electronics CO., LTD.

In the process of manufacturing the connector, many process-related problems are involved. One of the more important parts is the electroplating process. Do you know which plating process problems exist in the manufacture of connector products? The following Konnra Electronics electronics engineers will give you a detailed introduction to the connector plating process. If you want to talk about the connector plating process, Konnra Electronics engineers believe that there are five points that need to be taken seriously, as follows: First point: establish long-term cooperation with electroplating manufacturers 1. It is necessary to establish long-term cooperative relationship with 2-3 electroplating manufacturers. Remember to reduce the cost at the moment, and frequently change the electroplating manufacturers. In order to facilitate the management of product docking, it is best to control the driving with the electroplating manufacturer. - Within 4 hours. 2. In order to facilitate ...

In the electronic world, every product can be produced and circulated in the market, and it must have its own advantages. So, do you know the advantages of high-current terminals? There are so many high-current products in components, today  Konnra Electronics  engineers will introduce you to the advantages of high-current terminals, so that you can clearly understand the advantages of high-current terminals. The high-current terminal block is composed of an insulating base, an insulating partition and a wire component, and the insulating base is integrated. The wiring component is seated on the insulating base and placed in the insulating partition. The wiring component includes a wire clamp, a screw, a nut and a support. The frame has a U-shaped support frame, and the wire clamp is placed in the support frame. The nut and the screw press the wire clamp along the elongated holes on the U-shaped end faces of the support frame. The wire clamp is composed of the upper wire cl...

It is well known that corrosive gases, high humidity and strong oscillations are three important conditions that cause oxidation and frictional corrosion and lead to connector failure. These environmental factors can have a significant impact on tin and lead-tin contact surfaces, as is the case with 90% of connector surfaces. Usually, people use electroplated precious metals, such as gold plating or silver plating, because these metals do not oxidize. The thickness of these coatings varies from 0.5 μm to 1.27 μm. However, unfortunately, because of the high price of these precious metals and their processing, such electroplating processes are expensive, so people use such electroplating materials as little as possible. In automotive electrical harness applications, only about 10% of the connection points use this type of metal. As a result, some major connector suppliers, such as FCI, have other alternative plating solutions (such as pure tin plating, Tin-Teflon, NXT, and press-fit t...