Konnra Electronics CO., LTD.

Connectors are a component that our electronic engineering technicians often come into contact with. Its role is to bridge the communication between the blocked or isolated circuits in the circuit, so that the current flows, so that the circuit achieves the intended function. Connectors are an indispensable part of an electronic device. You will always find one or more connectors along the path through which the current flows. The form and structure of the connector are ever-changing. There are various types of connectors depending on the application object, frequency, power, and application environment. But no matter what kind of connector, the current should be ensured to flow smoothly and continuously. In general terms, the connection of the connector is not limited to current. In today's rapid development of optoelectronic technology, in the optical fiber system, the carrier that transmits the signal is light, and the glass and plastic replace the wires in the ordinary circuit,...

1.  Connector   : A detachable component (except an adapter) that is typically attached to a cable or device for electrical connection to the transmission line system. 2. RF connector: A connector used in the RF range. 3. Video: Radio waves with a frequency range between 3HZ and 30MHZ. 4. Radio frequency: Radio waves with a frequency range between 3 thousand HZ and 3000 GHz. 5. High frequency: Radio waves with a frequency range between 3 MHz and 30 MHz. 6. Coaxial: The inner conductor has a medium support, which is structurally capable of obtaining the smallest reflection coefficient in the frequency range in the measurement. 7. Triax: A transmission line consisting of three layers of concentric conductors with a common axis and insulated from each other. 8. Grade: The level of mechanical and electrical precision of the connector, especially in terms of the specified reflection coefficient. 9. Universal Connector (Level 2): A connector that is manufactured with the wides...

First, the structure of the connector The basic structural parts of the connector are: 1 plastic case; 2 terminals; 3 pin holder & Other Wire to wire connection structure: Wire to board connection structure: Board to board connection structure: Second, the board end needle classification:         Wafer         By type to distinguish as below:         DIP                             SMT         By assembly to distinguish as below:         90 degrees                  180 degree         DIP          180 degrees:          90 degrees:         SMT         180 degrees:        ...