What optimizations should be made by medical connector manufacturers

 The medical industry, no matter what era, is an industry that needs to be developed. In the 21st century, many industries related to the medical industry have derived many more, for example, the medical connector industry is one of them. Due to the special nature of medical products, there are special requirements for the products of medical connector manufacturers. Therefore, major medical connector manufacturers need to optimize their products. So what optimizations should medical connector manufacturers do? The following Konnra connectorengineers will answer this question in detail for you.

KR2541 connectors
Engineers from professional medical connector manufacturers believe that there are four main points for optimizing medical connector products. The specific content is as follows:
1. Functionality of medical connectors
As medical devices become more and more complex, medical connectors must continue to evolve to keep up with the trend and integrate important functions into their devices.
2. Miniaturization of medical connectors
Medical equipment has been becoming smaller and smaller. In order to keep up with the development of the times, medical connectors also need to adapt to medical equipment and continue to shrink in size.
KR2540 connectors
Three, the disinfection method of the medical connector
In recent years, efforts to reduce hospital-acquired infections have made the disinfection work stand out. Medical connectors must be able to withstand the disinfection of wipes, gamma rays, ethylene oxide gas, autoclaves and Sterrad commonly used on medical devices. method.
Fourth, the service life of medical connectors

The number of times the connector can be connected and disconnected is also a consideration for the designer. For example, in single-use applications, the connector must perform well at a relatively low number of cycles, and MRI coils that are reused every day or other applications require reliable connector life in thousands of medical plug-in cycles. 




评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and
阅读全文

Talking about the function, classification and working principle of OTG data line

图片
  What is the OTG line? OTG is mainly applied to the connection between various devices or mobile devices for data exchange. The development of USB technology enables computers and peripheral mobile devices to transmit various data through simple USB connections. This will lead to a situation, once the mobile phone or tablet does not have a computer, we cannot manage the data of mobile devices such as mobile phones, which brings inconvenience to users. As mobile devices such as mobile phones become more and more like computers, can we imagine that we can use mobile phones as computers? Can a U disk, USB network card, etc. be connected to the phone? The answer is yes, the OTG function is to realize that the mobile phone can be connected with USB devices such as U disk, but the mobile phone has a tiny   USB   interface, which cannot meet the needs of USB ports such as U disk. So far, the OTG data cable came into being. The role of OTG is to realize data transfer between mobile devices wi
阅读全文

The optical fiber connector

图片
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two end faces of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors. To some extent, fiber optic connectors affect the reliability and performance of optical transmission systems. Basic introduction A connecting device for re-plugging between optical fibers, also called a fiber optic movable joint. The main performance parameters (and typical values) are: insertion loss (<0.5dB), plug-and-repeat repeatability and interchangeability between connectors (500 changes). When used in a large-capacity high-speed transmission system, reflection is also required to be small. Introduction Optical fiber con
阅读全文