What requirements do industrial RJ45 connectors need to meet?

In the industrialized production of the 21st century, the environment during the manufacture of processing machinery is relatively harsh, usually producing a large amount of heat, dust, moisture, corrosive liquid, vibration, etc. These conditions will lead to a greatly shortened connector life. Therefore, people often have higher requirements for RJ45 connector products in industrial applications. It must not only be waterproof and dustproof, to ensure the stability of the signal, but also meet some requirements. So what exactly do RJ45 connectors for industrial applications need to meet? Konnra connector engineers will introduce these requirements to you.

RJ45 2X4 PIN connector
Generally speaking, RJ45 connectors for industrial applications need to meet three aspects: transmission express, mask function and design details. The specific contents are as follows:
1. Faster transmission speed
Production efficiency is extremely important for industrial production. Data transmission is one of the important links to improve efficiency and increase output. This is a technology that RJ45 connector manufacturers need to pay attention to.
2, Good mask function
A good mask function is not only waterproof and dustproof, but also protection against external signal interference and noise. There are many electronic devices in the factory, so signal interference may be a serious problem. In order to ensure more stable transmission, interference must be reduced. . In addition, noise is an important factor affecting signal stability in noisy factories. Therefore, RJ45 connector manufacturers can
To improve.
3. Good product design details
The size of equipment used for industrial production is relatively large, but every detail is important, even just a small screw. Therefore, RJ45 connector manufacturers need to investigate detailed information. For example, to avoid inserting in the wrong direction, there must be a foolproof latch. To use a safety lock, there must be a nut. In addition, in order to make it available for each end face, it must be able to wire, and there must be a ground wire on the external board to connect it to the connector housing.



评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and
阅读全文

Talking about the function, classification and working principle of OTG data line

图片
  What is the OTG line? OTG is mainly applied to the connection between various devices or mobile devices for data exchange. The development of USB technology enables computers and peripheral mobile devices to transmit various data through simple USB connections. This will lead to a situation, once the mobile phone or tablet does not have a computer, we cannot manage the data of mobile devices such as mobile phones, which brings inconvenience to users. As mobile devices such as mobile phones become more and more like computers, can we imagine that we can use mobile phones as computers? Can a U disk, USB network card, etc. be connected to the phone? The answer is yes, the OTG function is to realize that the mobile phone can be connected with USB devices such as U disk, but the mobile phone has a tiny   USB   interface, which cannot meet the needs of USB ports such as U disk. So far, the OTG data cable came into being. The role of OTG is to realize data transfer between mobile devices wi
阅读全文

The optical fiber connector

图片
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two end faces of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors. To some extent, fiber optic connectors affect the reliability and performance of optical transmission systems. Basic introduction A connecting device for re-plugging between optical fibers, also called a fiber optic movable joint. The main performance parameters (and typical values) are: insertion loss (<0.5dB), plug-and-repeat repeatability and interchangeability between connectors (500 changes). When used in a large-capacity high-speed transmission system, reflection is also required to be small. Introduction Optical fiber con
阅读全文