The principle of 3D printer

3D printing, like laser forming technology, uses layered processing and superimposed forming to complete 3D physical printing. The printing process of each layer is divided into two steps. First, a layer of special glue is sprayed on the area to be formed. The glue droplet itself is very small and is not easy to spread. Then, spray a uniform layer of powder. The powder will quickly solidify and adhere to the glue, while the area without glue will remain loose. In this way, the solid model will be "printed" under the alternation of a layer of glue and a layer of powder. After printing, the model can be "planned" as long as the loose powder is swept away, and the remaining powder can be recycled.
3D printer board
The original 3D printing seems complicated, but it's actually very simple
3D printer board
After watching a lot of 3D printed videos and models, you will be stunned by its magical cloning ability. This is amazing. It is a magical clone machine. How does such high technology work?
Speaking of its principle, it is not complicated at all. Its operating principle is basically the same as that of traditional printers, and it is also "grinded" a little bit with the nozzle. It's just that 3D printing does not spray ink, but "printing material" such as liquid or powder, and a rapid prototyping device that uses light curing and paper stacking technologies. Computer control superimposes the "printing materials" layer by layer, and finally turns the blueprint on the computer into a physical object.
3D printer board

Its working steps are this: use CAD software to create items, if you have ready-made models, such as animal models, characters, or miniature buildings, etc. Then copy it to the 3D printer via SD card or USB flash drive. After setting the print, the printer can print them out. The breakdown of its working structure is as follows. The working principle of the 3D printer is basically the same as that of the traditional printer. They are composed of control components, mechanical components, print heads, consumables and media. The printing principle is the same. The 3D printer mainly designs a complete three-dimensional model on the computer before printing, and then prints out.

The picture in the article is the main board of 3D printer, which mainly uses the pin header,female header,box headerand USB 2.0 BF. Konnra connectors not only produce connectors, but also provide connector solutions.


评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and
阅读全文

Talking about the function, classification and working principle of OTG data line

图片
  What is the OTG line? OTG is mainly applied to the connection between various devices or mobile devices for data exchange. The development of USB technology enables computers and peripheral mobile devices to transmit various data through simple USB connections. This will lead to a situation, once the mobile phone or tablet does not have a computer, we cannot manage the data of mobile devices such as mobile phones, which brings inconvenience to users. As mobile devices such as mobile phones become more and more like computers, can we imagine that we can use mobile phones as computers? Can a U disk, USB network card, etc. be connected to the phone? The answer is yes, the OTG function is to realize that the mobile phone can be connected with USB devices such as U disk, but the mobile phone has a tiny   USB   interface, which cannot meet the needs of USB ports such as U disk. So far, the OTG data cable came into being. The role of OTG is to realize data transfer between mobile devices wi
阅读全文

The optical fiber connector

图片
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two end faces of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors. To some extent, fiber optic connectors affect the reliability and performance of optical transmission systems. Basic introduction A connecting device for re-plugging between optical fibers, also called a fiber optic movable joint. The main performance parameters (and typical values) are: insertion loss (<0.5dB), plug-and-repeat repeatability and interchangeability between connectors (500 changes). When used in a large-capacity high-speed transmission system, reflection is also required to be small. Introduction Optical fiber con
阅读全文