What are the types of crimping automotive electrical connectors

Needless to say, everyone already knows that automotive electrical connectors are accessories specifically designed for automotive electrical systems. With the continuous upgrade of the manufacturing industry, the automotive system has also undergone tremendous changes. Modern systems are widely connected and controlled through microprocessors, which has also caused the market to continue to increase the demand for high-quality wiring and electrical connectors. With the increase in product demand, the types of crimping automotive electrical connectors have also diversified. Konnra connector engineers will introduce the types of crimping automotive electrical connectors for you.
Automatic wire harnesses

When manufacturing a vehicle, when selecting an automotive electrical connector, the current rating, circuit density, wire size, voltage, configuration, and meshing force of the product must be considered. Due to the different sizes of crimping connectors, which can effectively accommodate the largest specifications of wiring, crimping automotive electrical connectors are generally divided into five types, as follows:

Automatic wiring harness

1. Seamless crimping
Seamless crimping automotive electrical connectors are usually cut from circular cuts to make them look like tubes.
2. Seam type crimping
The seam-type crimp-type automotive electrical connector is cut from a flat material. They are then rolled into a tube with seams running through the length of the connection.
3. Non-insulated crimping type
Non-insulated crimp-type automotive electrical connectors are not insulated, so once they are crimped, they must be insulated with heat shrink tubing using riveting tools.
4, heat shrinkable insulation crimping type
Heat-shrinkable insulated electrical connectors are the best type of all automotive electrical connectors, so they are also expensive. Because of their good water resistance, they are ideal for marine applications and under-hood applications.
5. Insulation crimping

Insulated crimping automotive electrical connectors are available in a variety of sizes and types. Insulated connectors can be straight or open toward the end. Therefore, it is very important to ensure that this connector is suitable for the insulation diameter of wires and meters.




评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and...
阅读全文

The optical fiber connector

图片
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two end faces of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors. To some extent, fiber optic connectors affect the reliability and performance of optical transmission systems. Basic introduction A connecting device for re-plugging between optical fibers, also called a fiber optic movable joint. The main performance parameters (and typical values) are: insertion loss (<0.5dB), plug-and-repeat repeatability and interchangeability between connectors (500 changes). When used in a large-capacity high-speed transmission system, reflection is also required to be small. Introduction Optical fiber con...
阅读全文

The working principle of IDC termination method

图片
Introduction and background IDC termination method is often used in various applications. This termination technology has been successfully applied to a variety of industries where multi-contact mass termination and very economical. Multi-point cable termination can be achieved with insulation displacement  connectors (IDC)  because the termination force is relatively small (usually a few pounds, while crimping is hundreds of pounds). In addition, another advantage of this technology is that it eliminates the stripping operations required in crimping. Therefore, in many electronic applications, such large-scale terminations are often used when using multi-strand cables. In many cases, multiple flat cables are used for this very economical large-scale termination. However, discrete multi-strand cables can also be used to reduce costs because the steps of cable stripping preparation and terminal insertion are eliminated. This type of application provides rapid assembly of high-d...
阅读全文