On the Advancement of Single Row Pin Design in the Connector
Among the components, the design of the product often has a strong correlation with its performance. A good design can not only improve the aesthetics of the product, but also extend the service life of the product. Then how much do you know about the design knowledge of single-row,Konnra connectors' engineer will give you a detailed introduction to the advanced nature of the single-row needle design.
The development of single-row needles should be miniaturized. Since many products have to face smaller and lighter developments, there are certain requirements for spacing, appearance, and height, which will make the product requirements more precise The best choice for the board is small pitch 0.6mm and 0.8mm, high density, high speed transmission, high frequency direction development. Miniaturization means that the center spacing of single-row needles is smaller, and high density means the realization of a large number of cores.
The function of the single-row pin is to act as a bridge between blocked or isolated circuits in the circuit, and take on the task of current or signal transmission. Usually used in conjunction with the row bus to form a board-to-board connection; or used in conjunction with a wire harness to form a board-to-wire connection; can also be used independently for board-to-board connection. When people choose a single-row needle, they will first consider the cost control. Others are high quality, high stability, and the design characteristics of the single-row needle itself. In order to avoid electronic designers underestimating the importance of single-row pins in the design process, we made some reference opinions for you because of small losses. That is, there must be a double-rod design idea in the design; there is also a solid design and so on.
The function of the single-row pin is to act as a bridge between blocked or isolated circuits in the circuit, and take on the task of current or signal transmission. Usually used in conjunction with the row bus to form a board-to-board connection; or used in conjunction with a wire harness to form a board-to-wire connection; can also be used independently for board-to-board connection. When people choose a single-row needle, they will first consider the cost control. Others are high quality, high stability, and the design characteristics of the single-row needle itself. In order to avoid electronic designers underestimating the importance of single-row pins in the design process, we made some reference opinions for you because of small losses. That is, there must be a double-rod design idea in the design; there is also a solid design and so on.
The manufacturing raw materials in the single-row needle are white and bright, and the color is between silver and nickel. The initial solderability is acceptable. The high temperature aging or long-term storage reduces the solderability more seriously. The gold-plated bottom layer originally used for ornaments that come into contact with the human body can also be used for combinations where the electrical performance requirements are not too high, but the discoloration resistance requires a higher white tone and has certain solderability requirements.
评论
发表评论