What is the standard for making wire harnesses?

In the process of wire harness making, there must be a standard of its own, and then the major manufacturers to produce according to this standard, so that a piece of wire harness products appeared in front of customers. It is precisely because of the emergence of standards that the batch processing of wire harnesses is possible. So what is the standard for making wire harnesses? Konnra Electronics engineers will give you a detailed introduction of the standards for making wire harnesses. I hope that after our explanation, you can An in-depth understanding of the production standards for harnesses.

Before talking about the standard of wire harness production, we should first understand what is the wire harness. The electric bee optimization engineer pointed out that the wiring components of each connector device in the wire harness circuit are composed of an insulating sheath, a terminal block, a wire and an insulating banding material. Therefore, the production of wire harnesses needs to be based on the corresponding standards, because the specific detailed standards are not convenient to disclose, can only say a rough, the total is divided into the following categories.

1. Wire harness process
2. Open line process
3. Crimp process
4. Pre-installed process
5. Assembly process

After completing the above five steps, it is necessary to enter the inspection process. In order to ensure the quality of the wire harness products, it is necessary to strictly implement the above various links. Since the wire harness acts as a connection, the crimping requirements for the wire harness are very high. After completing the above tests, the wire harness is almost done. The wire harness products produced by Konnra Electronics are strictly in accordance with industry standards, with high qualification rate and long-lasting performance, which is worthy of the trust of users.