Board-to-board, wire-to-board, wire-to-wire connectors distinction

In daily life, if there are triplets in a family, it is a headache to distinguish them as relatives. In the connector, there are also such headaches, such as board-to-board connectors, wire-to-board connectors, and wire-to-wire connectors are easy to confuse, and the name is big. So how do you distinguish between board-to-board, wire-to-board, and wire-to-wire connectors? Don’t bother, the following Konnra Electronics engineers come to you for board-to-board connectors, wire-to-board connectors, and wire pairs. The difference between the three connectors of the line connector.
Connectors_Konnra Electronics
First, board to board connector:
The board to board connector is the most powerful connector product among all connector product types. Currently, the main spacing of board-to-board connectors is 0.4mm, 0.5mm, 0.635mm, 0.8mm, 1.00m, 1.27mm. . Board to board connectors are mainly used in power systems, communication networks, financial manufacturing, industrial automation, medical equipment, office equipment, smart home appliances, military manufacturing and other industries.
Second, wire to board connector:
The wire to board connector is the connector that connects the wires and the circuit board. The function of the connector is mainly to transmit power and signals. Therefore, the wire to board connector can be said to be the ancestor of all the linkers, depending on the application and requirements. There are many types of wire to board, but in the information industry, most of them are distinguished by the distance between the pin and the foot and the current and voltage transmitted. The main application areas of wire-to-board connector products include commercial electronic equipment, household appliances and other general industrial and commercial fields using auxiliary circuits.
Third, wire to wire connector:
The wire to wire connector includes a wire to pair cable or a wire to wire, and is characterized in that two single-wire individuals or two of the two cables are permanently connected to each other. These permanent connections are more commonly found in fixed connection center-to-wire connections and IDC connections. Wire to wire connector products are mainly used in automotive, communications, consumer electronics, data processing, industrial machinery and other fields.



评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and
阅读全文

Talking about the function, classification and working principle of OTG data line

图片
  What is the OTG line? OTG is mainly applied to the connection between various devices or mobile devices for data exchange. The development of USB technology enables computers and peripheral mobile devices to transmit various data through simple USB connections. This will lead to a situation, once the mobile phone or tablet does not have a computer, we cannot manage the data of mobile devices such as mobile phones, which brings inconvenience to users. As mobile devices such as mobile phones become more and more like computers, can we imagine that we can use mobile phones as computers? Can a U disk, USB network card, etc. be connected to the phone? The answer is yes, the OTG function is to realize that the mobile phone can be connected with USB devices such as U disk, but the mobile phone has a tiny   USB   interface, which cannot meet the needs of USB ports such as U disk. So far, the OTG data cable came into being. The role of OTG is to realize data transfer between mobile devices wi
阅读全文

Calculation method of wire diameter of automobile wiring harness

图片
  When using the CATIA module for wire harness data production, the wire harness segment diameter is written into the software as an important parameter. All subsequent clearance checks and motion analysis are based on this value. Therefore, if there is a big difference from the actual situation, it will inevitably lead to the original requirement of meeting the safety gap, and it will be found to have interfered when the vehicle is actually installed, or even cannot be assembled. Konnra wiring harness  engineers provide you with a theoretical calculation method (wire harness standard algorithm) for estimating the outer diameter of automotive wiring harnesses. A wire harness segment is a collection that binds all wires together with tape or other wrapping. Taking into account that the tape is only wound on the wire harness, and the wrapping of casings such as corrugated pipes also needs to determine the outer diameter of the wire harness before selection. Therefore, when calculating, w
阅读全文