Lighting terminal is correctly selected

        What is the lighting terminal ? For the people outside the industry must be very confused, let alone let them choose this product. The following Konnra Electronics engineers have sorted out some related purchases of lighting terminal blocks, letting you know how to buy high-quality lighting terminal products, and interested users will come and read them.
KR2001 connector
        There is a link between the lamp and the power supply, but the connection mode of the power supply is different. According to the way of connecting the power supply of the lamp, the structural design also needs to meet the requirements of the lamp as much as possible, convenient to use, in the process of connecting the electric appliance. In the reliability, it is necessary to ensure that the safety of electric shock protection is also indispensable. The design of the luminaire basically has a link that cannot be ignored.
        Generally, the common connection method of the lamp includes a terminal, a method of introducing the power cable into the interior of the lamp for connection, and a connection lead, connecting the power cable and the lamp, and putting it into the casing of the lamp. He has a fixed junction box that gets a good protection inside.
        For the cord that cannot be exposed, the electrical connection system of the luminaire can be finally introduced into the outer casing of the luminaire, and the connecting plug of the cord is inserted into the junction box and connected to the power source. In this case, you need to use one of the most important connectors, connect through the connection, can also improve its performance, and also has a good security.
        Of course, these three methods can be said to be the most widely used methods at present, and can be applied to various luminaires with strong versatility, and the addition of the connector will also make the installation more convenient.
        The connector can make the connection between the lines more secure. In the end, the luminaire will not cause the illuminator to be off due to poor connection. It also needs to be removed and reinstalled. When using the connector, these problems are basically It can be solved all, and it has also increased in service life.



评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and
阅读全文

Talking about the function, classification and working principle of OTG data line

图片
  What is the OTG line? OTG is mainly applied to the connection between various devices or mobile devices for data exchange. The development of USB technology enables computers and peripheral mobile devices to transmit various data through simple USB connections. This will lead to a situation, once the mobile phone or tablet does not have a computer, we cannot manage the data of mobile devices such as mobile phones, which brings inconvenience to users. As mobile devices such as mobile phones become more and more like computers, can we imagine that we can use mobile phones as computers? Can a U disk, USB network card, etc. be connected to the phone? The answer is yes, the OTG function is to realize that the mobile phone can be connected with USB devices such as U disk, but the mobile phone has a tiny   USB   interface, which cannot meet the needs of USB ports such as U disk. So far, the OTG data cable came into being. The role of OTG is to realize data transfer between mobile devices wi
阅读全文

Calculation method of wire diameter of automobile wiring harness

图片
  When using the CATIA module for wire harness data production, the wire harness segment diameter is written into the software as an important parameter. All subsequent clearance checks and motion analysis are based on this value. Therefore, if there is a big difference from the actual situation, it will inevitably lead to the original requirement of meeting the safety gap, and it will be found to have interfered when the vehicle is actually installed, or even cannot be assembled. Konnra wiring harness  engineers provide you with a theoretical calculation method (wire harness standard algorithm) for estimating the outer diameter of automotive wiring harnesses. A wire harness segment is a collection that binds all wires together with tape or other wrapping. Taking into account that the tape is only wound on the wire harness, and the wrapping of casings such as corrugated pipes also needs to determine the outer diameter of the wire harness before selection. Therefore, when calculating, w
阅读全文