Development requirements for electronic connectors

The diversity of electronic connectors on the market is inseparable from the efforts of major manufacturers. Do you know what the R&D requirements for electronic connectors are? For the knowledge of the development requirements of electronic connectors, Konnra Electronics electronic engineers will explain to you. Specific requirements for connector development. The demand for electronic products has grown steadily, and the demand for electronic connectors has also risen. As demand has become higher, major manufacturers have begun to face higher challenges and technical requirements.
Konnra Electronics
In order to gain a place in the connector industry, connector R&D companies must step up the pace of industrial adjustment, increase technological innovation and capital investment, in order to produce high-performance connectors that meet market demands and adapt to the times. According to the professional connector developer engineers, the requirements of the connector manufacturing industry are mainly concentrated on:
First, good processing basic technology
A good connector requires a perfect combination of design, equipment, and technology. At the same time, this has higher requirements for equipment matching and higher technical barriers.
Second, there is a need for a higher mold design level.
Due to the different shapes of the terminals, the connector has a structure, how to carry out reasonable design is very important, if the structure is unreasonable, the product will be unqualified.
Third, high-precision equipment
The connector terminals require high precision of the processing equipment, and the accuracy of foreign equipment can reach ±0.002mm, while the general domestic equipment can only reach ±0.01mm.
Driven by the trend of miniaturization of connector interfaces and high data transmission rate, the requirements for future connector molds will become more and more demanding. This requires higher equipment, materials, quality and other requirements for connector molds. The speed has reached 500 rev / min - 3000 rev / min, which is a technical challenge for connector R & D companies.

Konnra Electronics is a manufacturer specializing in the development and production of electronic connectors. It is a manufacturer of professional connectors and wiring harness solutions for customers. Welcome customers to visit our company and provide valuable advice for our company.



评论

发表评论

此博客中的热门博文

Talking about the function, classification and working principle of OTG data line

图片
  What is the OTG line? OTG is mainly applied to the connection between various devices or mobile devices for data exchange. The development of USB technology enables computers and peripheral mobile devices to transmit various data through simple USB connections. This will lead to a situation, once the mobile phone or tablet does not have a computer, we cannot manage the data of mobile devices such as mobile phones, which brings inconvenience to users. As mobile devices such as mobile phones become more and more like computers, can we imagine that we can use mobile phones as computers? Can a U disk, USB network card, etc. be connected to the phone? The answer is yes, the OTG function is to realize that the mobile phone can be connected with USB devices such as U disk, but the mobile phone has a tiny   USB   interface, which cannot meet the needs of USB ports such as U disk. So far, the OTG data cable came into being. The role of OTG is to realize data transfer between mob...
阅读全文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and...
阅读全文

BNC interface protocol in video output

图片
In the following, you will be presented with a set of questions and answers about the "What protocol is going on in the BNC interface video output" and the  Konnra Electronics  engineers' Q&A record, so that you can easily understand what protocol is going on in the video output of the BNC interface in the interaction. related question. The core of the problem: What protocol is going inside the BNC interface video output? Problem Description: For example, this bnc interface video output device, BNC is the signal of the H.264 protocol, it is necessary to configure the photoelectric conversion equipment between it and the camera, how to configure it? What kind of docking can it be? Answer: The BNC interface input and output is commonly referred to as the Q9 header, which is used to transmit baseband video signals. The single BNC port of the monitoring device transmits the analog composite signal. The video recorder saves the video file of the analog video signal into...
阅读全文