Method and application technology of pin header

Pin headers are definitely not unfamiliar to the practitioners in the component industry. You can know how to use the pins and how to use them. If you don't know about them, read this article, Konnra Electronics are specially organized for you and I hope to help you.
Pin header applications: smart meters, meters, carriers, UPS, inverters, driving recorders, car alarms, network switches, routers, notebooks, computers, MID. Digital cameras, boards and smart communication products, smart home appliances, etc.
Pin-out function: Its function is to function as a bridge between the blocked or isolated circuits in the circuit. The task set for carrying current or signal transmission is usually used with the motherboard to form a board-to-board connection. Or used in conjunction with the end of the electronic harness to form a board-to-wire connection; it can also be used independently for board-to-board connection.
KR2006 pin header
Pin classification and type:
1. The pins are divided according to the spacing: 0.8mm, 1.0mm, 1.27mm, 2.0mm, 2.54mm spacing.
2, according to the height of the plastic and the number of plastics (such as single plastic, double plastic, 3 plastic, etc.)
3, according to the number of rows of pin headers: single row, double row, 3 rows, 4 rows, etc.
4, according to the installation method: 180 degrees with S, 90 degrees with R, SMT with M.
Pin packing method: bag, tube, and package.
Pin material: pin material: brass or phosphor bronze; insulator material: plastic UL 94V-0.
Surface treatment: gold plated 0.8u, tin plated, nickel plated
KR2542 pin header
The specific parameters of the pin header are explained in the item number:
1. Row number: single row, double row to choose from.
2. PIN number: 1-100P.
3. Welding method: straight foot, bent foot, SMT; the size of the needle.
4. Size: Dimensions, length, width, thickness, spacing, etc.
5. Spacing: 0.8 mm, 1.0 mm, 1.27 mm 2.0 mm, 2.54 mm pitch.
6. Electrical parameters, as shown
                                    Pitch     Item1.00mm1.27mm2.00mm2.54mm
Pin specification0.3X0.30.4X0.40.5X0.50.64X0.64
Insulator1.0/1.2/1.51.0-4.01.5/2.02.5
Rated current1A1A2A3A
Rated voltage300V300V500V600V
Contact resistance20mΩ20mΩ20mΩ20mΩ
Insulation resistance500MΩ1000MΩ1000MΩ1000MΩ
Working temperature-45℃~+105℃-45℃~+105℃-45℃~+105℃-45℃~+105℃
Pin processing technology: The process of pin header processing is mainly as follows: firstly, the pins are processed with brass (or phosphor bronze) as required, and then nickel is plated and then gold plated according to requirements, and the insulator part is processed by using the mold, and finally, the special part is used. The pins are mounted on the device to the insulation according to the size requirements.





评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and...
阅读全文

The optical fiber connector

图片
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two end faces of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors. To some extent, fiber optic connectors affect the reliability and performance of optical transmission systems. Basic introduction A connecting device for re-plugging between optical fibers, also called a fiber optic movable joint. The main performance parameters (and typical values) are: insertion loss (<0.5dB), plug-and-repeat repeatability and interchangeability between connectors (500 changes). When used in a large-capacity high-speed transmission system, reflection is also required to be small. Introduction Optical fiber con...
阅读全文

The working principle of IDC termination method

图片
Introduction and background IDC termination method is often used in various applications. This termination technology has been successfully applied to a variety of industries where multi-contact mass termination and very economical. Multi-point cable termination can be achieved with insulation displacement  connectors (IDC)  because the termination force is relatively small (usually a few pounds, while crimping is hundreds of pounds). In addition, another advantage of this technology is that it eliminates the stripping operations required in crimping. Therefore, in many electronic applications, such large-scale terminations are often used when using multi-strand cables. In many cases, multiple flat cables are used for this very economical large-scale termination. However, discrete multi-strand cables can also be used to reduce costs because the steps of cable stripping preparation and terminal insertion are eliminated. This type of application provides rapid assembly of high-d...
阅读全文