Terminal cross-section analyzer for wire harness checking

​

Terminal cross-section analyzer

        The terminal cross-section analyzer is a precision detection and analysis equipment specially developed for the wire harness industry quality inspection. The whole system consists of terminal cutting equipment, grinding equipment, corrosion cleaning section image acquisition system, wire harness terminal picture measurement and analysis system, etc. Mechanical design, modular combination, make operation more convenient and fast. The complete inspection system can complete the processing analysis of one terminal in 5 minutes, which greatly improves the speed of the quality inspection of the terminal cross-section. Easy operation, high quality image acquisition system, accurate measurement analysis to protect your production. High-performance microscopes and dedicated software make it easy to measure length and calculate area.

Check-points for correct crimping
        Ultra-high-definition observation of objects can produce erect three-dimensional images, strong stereoscopic effect, clear and wide imaging, with long working distance; configuration of high-precision wire harness terminal picture measurement and analysis system, combined into high-quality optical system and high The perfect combination of resolution cameras makes the cross-sectional image clearer, and the unique fixed-time setting makes the measurement more accurate.
        In order to provide customers with better quality wire harness products, Konnra Electronics has purchased a more advanced terminal cross-section analyzer on the market.


评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and...
阅读全文

The optical fiber connector

图片
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two end faces of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors. To some extent, fiber optic connectors affect the reliability and performance of optical transmission systems. Basic introduction A connecting device for re-plugging between optical fibers, also called a fiber optic movable joint. The main performance parameters (and typical values) are: insertion loss (<0.5dB), plug-and-repeat repeatability and interchangeability between connectors (500 changes). When used in a large-capacity high-speed transmission system, reflection is also required to be small. Introduction Optical fiber con...
阅读全文

The working principle of IDC termination method

图片
Introduction and background IDC termination method is often used in various applications. This termination technology has been successfully applied to a variety of industries where multi-contact mass termination and very economical. Multi-point cable termination can be achieved with insulation displacement  connectors (IDC)  because the termination force is relatively small (usually a few pounds, while crimping is hundreds of pounds). In addition, another advantage of this technology is that it eliminates the stripping operations required in crimping. Therefore, in many electronic applications, such large-scale terminations are often used when using multi-strand cables. In many cases, multiple flat cables are used for this very economical large-scale termination. However, discrete multi-strand cables can also be used to reduce costs because the steps of cable stripping preparation and terminal insertion are eliminated. This type of application provides rapid assembly of high-d...
阅读全文