Good luck to the start work

Start work.Start work.Start work. 

With a strong sense of the year.

We are starting a new year of work.

Today is the seventh day of the year.

Konnra Electronics wishes good luck getting started.

Good things again and again.

A lot of good dreams.

Life is like sesame blossoming - high.

2019

Start working.




 
New year new life.

Send away a year of hard work and busy.

We ushered in the first day of construction with a new look.

In the new year.

Change is the spirit of our fullness.

What remains unchanged is our persistent dream.

In the new year.

Konnra Electronics will continue to provide you with better service.

Keep the following formula in mind for the new year.

 

1.01=1+0.01,

That is to improve a little every day.

1.01 365th power means you improve a little bit every day.

After one year, you will make great progress.

Far greater than "1".

 

1 means to stand still,

After one year, you are still standing still.

Still the "1".

 

0.99=1-0.01,

That means you are going back a little bit every day.

You will be a year later.

Far less than "1".

Far behind being left behind.

It will be "1" and nothing will happen.

2019

Let's work together.

May we like to work.

May we achieve others in our work.

May we work hard and present our value.


评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and...
阅读全文

The optical fiber connector

图片
A fiber optic connector is a detachable (active) connection between an optical fiber and an optical fiber. The two end faces of the optical fiber are precisely butted together so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent. It also minimizes the impact on the system due to its involvement in the optical link, which is a basic requirement for fiber optic connectors. To some extent, fiber optic connectors affect the reliability and performance of optical transmission systems. Basic introduction A connecting device for re-plugging between optical fibers, also called a fiber optic movable joint. The main performance parameters (and typical values) are: insertion loss (<0.5dB), plug-and-repeat repeatability and interchangeability between connectors (500 changes). When used in a large-capacity high-speed transmission system, reflection is also required to be small. Introduction Optical fiber con...
阅读全文

The working principle of IDC termination method

图片
Introduction and background IDC termination method is often used in various applications. This termination technology has been successfully applied to a variety of industries where multi-contact mass termination and very economical. Multi-point cable termination can be achieved with insulation displacement  connectors (IDC)  because the termination force is relatively small (usually a few pounds, while crimping is hundreds of pounds). In addition, another advantage of this technology is that it eliminates the stripping operations required in crimping. Therefore, in many electronic applications, such large-scale terminations are often used when using multi-strand cables. In many cases, multiple flat cables are used for this very economical large-scale termination. However, discrete multi-strand cables can also be used to reduce costs because the steps of cable stripping preparation and terminal insertion are eliminated. This type of application provides rapid assembly of high-d...
阅读全文