Connector quality level

KR1253

With the rapid development of science and technology, the mechanical equipment is becoming more and more advanced. For example, in some industrial productions, the trend of robots taking the lead is becoming more and more obvious. In these mechanical products, connectors play an important role, so the quality of the connector directly affects the safety, practical performance, and service life of the machine. Therefore, the connector selected on the production equipment must have a good quality level. As a user, how do you know that the quality of the product is too good? Konnra Electronics believes that if the quality of the good connector needs to pass, these two aspects will be outstanding.

First aspect:
The quality of the connector is too low. Mechanical performance is one aspect that we must pay attention to. When connecting the connectors at two connection points, we mainly observe whether the insertion force and the extraction force of the connector parts meet the product standard. If the insertion force is too high, or the insertion is difficult, it is not only inconvenient to use, but also may cause safety hazards to the entire mechanical equipment for a long time. For the pull-out force on the other hand, this one should be as large as possible, because the pulling force is too small, it may cause the falling off, which will not only affect the service life of the connector, but also cause certain safety hazards to the whole mechanical equipment.
Second aspect:
1. When selecting a connector, on the other hand, pay attention to its environmental adaptability, which can be selected according to the working environment of the mechanical device using the connector. The connector used in mechanical equipment must be subjected to a working temperature range that is greater than the operating temperature range of the mechanical equipment. It must be able to work under the maximum humidity of the mechanical equipment, and also have the ability to resist impact, crush and even vibration.
2. In the high and low temperature of the product, a good connector product must be able to work normally under its standard high and low temperature, and its parts should not be damaged due to high temperature or low temperature. It is well known that humidity affects the insulation performance of the connector. Therefore, when selecting the connector, it must be considered whether the humidity of the environment will affect the connector. It is necessary to select the connector product with the corresponding protection level.
3. The connector also has an important indicator that it is manifested in seismic and impact resistance. This one is very obvious in aerospace, railway and road transportation. The connector must be strong and has a very good seismic effect. It can maintain normal work when encountering some harsh environments, and it will not cause damage due to huge impact, which will affect the work of the machine.
Konnra Electronics has always been committed to improving the quality of its products and enhancing its experience for its customers. We are continually working on it.