Which is more practical for DP fiber cable and HDMI fiber cable?

The advantages of DP fiber cable and HDMI fiber cable are different. In terms of device support, HDMI interface has an advantage. We know about the product. In the display, the number of products using HDMI interface is mostly, far exceeding the DP interface. The number of products, and the types of devices that can support the HDMI interface are also many. If the two are compared, the average user will select the HDMI fiber cable.
The DP fiber optic cable can be transmitted in 8k, and is stronger than the HDMI fiber cable in audio and video transmission. If it is necessary to transmit 8k, it is recommended to use the DP fiber cable.
DP connector DP cable
The DP fiber line introduced the 1.4 version 8k as early as 2016. Although the HDMI fiber line version 2.1 can now reach 8k, it is clear that the DP fiber line is more mature, and both are difficult to choose in terms of cost performance and quality.
HDMI connector HDMI cable
In terms of price, HDMI interface configuration is more, the price is also cost-effective, DP fiber line is mainly used on high-end models with DP interface, the price is slightly more expensive than HDMI fiber line.
From a development perspective, the HDMI interface is currently the mainstream, DP fiber optic cable may become the mainstream of the future, and most of the graphics card displays will support these two interfaces. Both are very good products, but the current HDMI interface is more, compatible with a variety of devices, and the popularity is higher.
I hope that through the collation and comparison of Konnra Electronics, everyone can better choose the fiber optic cable for their needs.



评论

发表评论

此博客中的热门博文

What is the coaxial connector?

图片
Coaxial connectors are used to transmit RF signals. They have a wide transmission frequency of up to 18 GHz or higher and are mainly used for radar, communication, data transmission and aerospace equipment. The basic structure of the coaxial connector includes: a center conductor (a positive or negative center contact); a dielectric material outside the inner conductor, or an insulator, and the outermost is an outer contact, which serves as a shield outside the coaxial cable. The same function of the layer, that is, the signal transmission, the grounding element as a shield or circuit. The coaxial connectors are mainly divided into: SMA, SMB, BNC, TNC, SMC, N-type, BMA, and the like. Male: Male (plug), thread inside, inside is the needle. Such as TNC (M). Female: Female (socket), threaded outside, inside is a hole. Such as SMA (F). RP: Reverse Polarity means that the head and the inside of the needle are opposite. Bulkhead: It is the joint of the lockable screw on the board and...
阅读全文

Talking about the function, classification and working principle of OTG data line

图片
  What is the OTG line? OTG is mainly applied to the connection between various devices or mobile devices for data exchange. The development of USB technology enables computers and peripheral mobile devices to transmit various data through simple USB connections. This will lead to a situation, once the mobile phone or tablet does not have a computer, we cannot manage the data of mobile devices such as mobile phones, which brings inconvenience to users. As mobile devices such as mobile phones become more and more like computers, can we imagine that we can use mobile phones as computers? Can a U disk, USB network card, etc. be connected to the phone? The answer is yes, the OTG function is to realize that the mobile phone can be connected with USB devices such as U disk, but the mobile phone has a tiny   USB   interface, which cannot meet the needs of USB ports such as U disk. So far, the OTG data cable came into being. The role of OTG is to realize data transfer between mob...
阅读全文

BNC interface protocol in video output

图片
In the following, you will be presented with a set of questions and answers about the "What protocol is going on in the BNC interface video output" and the  Konnra Electronics  engineers' Q&A record, so that you can easily understand what protocol is going on in the video output of the BNC interface in the interaction. related question. The core of the problem: What protocol is going inside the BNC interface video output? Problem Description: For example, this bnc interface video output device, BNC is the signal of the H.264 protocol, it is necessary to configure the photoelectric conversion equipment between it and the camera, how to configure it? What kind of docking can it be? Answer: The BNC interface input and output is commonly referred to as the Q9 header, which is used to transmit baseband video signals. The single BNC port of the monitoring device transmits the analog composite signal. The video recorder saves the video file of the analog video signal into...
阅读全文